Total weight 110-120 kg
Angled rebar can be hammered into ground as pegs, if additional footing required
Saturday, 18 March 2017
Rot & Fire Resistant Base for Shed, Garden Office or Decking (DES) in Grp Fibreglass Plastic from Composite Door Edge Strips
Rot & Fire Resistant Base for Shed, Garden Office or Decking, made in Grp Fibreglass Plastic from Composite Door Edge Strips (DES)
Each plank is 2.012 m long & weighs approx 11kg, so weighs down the shed base on windy days.
Total weight 110-120 kg
Angled rebar can be hammered into ground as pegs, if additional footing required
Close up
Depending on thickness of board used to cover it , extra slats may be needed to be added (see following pics )
Planks will joined by 75mm galvanised nails from a nail gun, or by 75mm collated screws
Plywood sheet added as floor
Total weight 110-120 kg
Angled rebar can be hammered into ground as pegs, if additional footing required
Subscribe to:
Post Comments (Atom)
We've had a flood of water that has leaked and damaged some of the hardware, electronic collectables and clothes we sell to raise funds for our project
We will let them dry out and then inspect them to see what can be salvaged
-
'Shelter and Hardware Bank Network' (SAHBN) Launch Press Release : 17/8/19 by Paul Ridley of Cabinz CIC Cabinz CIC announc...
-
Idea for sorting a mixed bucket of screws into smaller pots as relaxation & therapy Cabinz are talking and delivering screws. bost, n... -
Proposal to Create a Storage Solution to facilitate Reuse for Overfilled Garages in the UK, as an Alternative to Garden Rooms Introductio...
No comments:
Post a Comment