Mk 1 Ship Lap Type Wall Cladding With White Board Edge Off Cut (WBEOC)
Strips are fixed with 3.9 screws to Composite Door Edge Strip (CDES) uprights & cross beam.
I experimented with Lumberjack PU glue to try & seal joints, but the gap was too large. Silicone sealant may work / alternatively coat back with expanding foam to seal & insulate more.
Discussion was had re: whether gap for ventilation (like louvre shutters / doors ) may be useful in hotter climates.
Edge with mdf core at end & sides is exposed to rain. We laft a test panel in Uk weather for a yr & it expanded only slightly at edge. It appears that the glued plastic & polystryrene / foam composite keeps it in place.
Coating the back edge with paint if left exposed would be advisable.
however, the corved edge may trap water allowing it to settle deeper inot the mdf. A drop of paint or white silicone sealant may stop this
Monday 25 July 2016
Subscribe to:
Post Comments (Atom)
Proposal for 'Gap Rooms' to Create a Storage Solution to facilitate Reuse for Overfilled Garages in the UK, as an Alternative to Garden Rooms
Proposal to Create a Storage Solution to facilitate Reuse for Overfilled Garages in the UK, as an Alternative to Garden Rooms Introductio...
-
'Shelter and Hardware Bank Network' (SAHBN) Launch Press Release : 17/8/19 by Paul Ridley of Cabinz CIC Cabinz CIC announc...
-
This Blog page will contain energy saving ideas by Paul Ridley of Cabinz Cic / SAHBN and related educational web links Curently working o...
-
The Insulation Station is an idea by Paul Ridley of Cabinz cic / SAHBN to help address part of the current Energy Crunch by providing lo...
No comments:
Post a Comment