Simulating the 120 degree angle, a void forms between the panels. This could be joined with another strip of metal on the outside, or possibly an off cut from the side of a profile sheet.
An angled metal strip will need ot be screwed or po riveted onto inside to join sheets
. Care must be taken not to make a thermal bridge.
Metalclad Vertical Beam support can fill the void between panels & support roof weight
I have found a triangular shaped length of sapele hardwood timber to use as the wall frame.
This will be covered by a sheet of metal on the outside & a v shaped sheet on the inside
The walls will be 2m x 1m as pir panels are 1m wide & for hexayurt shape to work the width of panel must be half the length .
Saturday, 23 April 2016
Cabinz cic & SAHBN aid disaster recovery by donating fixings & selling low cost roofing after Ellesmere Port timber yard business fire
Cabinz CIC & the Shelter and Hardware Bank Network aid disaster recovery by donating fixings & selling low cost roofing after Elle...
'Shelter and Hardware Bank Network' (SAHBN) Launch - Press Release : 17/8/19 by Paul Ridley of Cabinz CIC'Shelter and Hardware Bank Network' (SAHBN) Launch Press Release : 17/8/19 by Paul Ridley of Cabinz CIC Cabinz CIC announc...
Experiment using steel Rebar to attach your shelter to a heavy foundation made from a concrete fence post